15
Profile Name:
the name that you will use to identify this Internet access profile
Obtain IP Addresses Automatically:
get the IP Address via PPP over Ethernet. Some DSL-based
ISPs use PPPoE to establish communications with an end-user. If you are connected to the Internet
through a DSL line, check with your ISP to see if they use PPPoE
ISP Account Name:
the username of your ISP account
ISP Account Password:
the password of your ISP account
(Optional) Service Name:
Enter the Service Name provided by your ISP if it is required.
(Optional) Access Concentrator Name:
Enter the Access Concentrator Name provided by your
ISP if it is required.
Idle Timeout (0-3600 seconds):
The default value of the idle timeout is 120 seconds. It represents
the number of seconds of inactivity over the connection: when this value is reached, Mistral Lan
Router ISDN will disconnect the connection. You can change the idle timeout value to anything
between 0 to 3600 seconds. But if you select
0
, the connection never times out.
Step 6
: If you choose
via PPTP
for the selection of
Obtain IP Address Automatically.
The
following screen will be displayed. Enter the following information and then click
Apply and
Test.
When you click
A
pply or Apply and Test, MISTRAL LAN ROUTER ISDN
connects to your Internet Service Provider. Watch the Message Window for any
messages. When the test is successful, your users will be ready to access the
Internet.
Содержание A02-RI_M02
Страница 5: ...3 1 4 This Router Device Application...