background image

                                                                                                    

50-Port Dual Web Rack Switch

 

 

 

QoS 

 

QoS gives you full control over which types of outgoing data traffic should be given priority by the 
Switch, ensuring important data like gaming packets move through the Switch at lightning speed, even 
under heavy load. 

1.4 Features

 

Dual Web Rack Switch provides the following features: 

• 

48×10/100Mbps Auto-negotiation Fast Ethernet RJ45 ports  

• 

2×10/100/1000Mbps Auto-negotiation Gigabit RJ45 ports  

• 

2×mini-GBIC ports 

• 

All RJ45 ports support auto MDI/MDIX, so there is no need to use cross-over cables or an up-
link port 

• 

Full/half duplex transfer mode for 10/100Mbps RJ45 port 

• 

Full duplex transfer mode for Gigabit port 

• 

Wire speed reception and transmission 

• 

Store-and-Forward switching scheme capability to support rate adaptation and ensure data 
integrity 

• 

Up to 4K unicast addresses entities per device, self-learning, and table aging  

• 

1536KBytes packet buffer 

• 

Supports IEEE 802.3x flow control for full-duplex mode ports 

• 

Supports Back-pressure flow control for half-duplex mode ports 

• 

Supports port-base VLAN  

• 

Supports port-base QoS  

• 

Supports Trunking on 1000BASE-T ports 

• 

Supports Port-setting for Speed/Disable, Flow control 

• 

Easy configuration via WEB Browser 

• 

Easy setting via Web Management Utility 

• 

Standard 19” Rack-mount size 

 

Содержание A02-F48-4G

































Отзывы: