background image

                                                                                                    

50-Port Dual Web Rack Switch

 

22 

 

• 

Abnormal* Transmit Error: a trap when there are transmit data error in copper port. 

• 

Abnormal*: 50 error packet count within 10 seconds. 

 

 

Abnormal*: 50 error packet count within 10 seconds. 

 
 

Set Password 

Password is the invaluable tool for the manager to secure Web Management Switch, use this function 
to change the password.  
If you forget the password, press the “Reset” button in the rear panel of the Switch, the current setting 
includes VLAN, Port Setting… etc. will be lost and the Switch will restore to the default setting.

 

 

 

Backup Setting 

The backup tools help you to backup the current setting of the Switch. Once you need to backup the 
setting, press the 

Backup

 button to save the setting.  

To restore a current setting file to the device, you must specify the backup file and press 

Restore

 

button to proceed the setting of the recorded file.

  

 

 

 

When restoring a recorded file, the current password will not be erased. 

 
 

Содержание A02-F48-4G

































Отзывы: