manualshive.com logo in svg

ATLANTEK 200, Руководство оператора

Поделиться
Скачать
ATLANTEK 200 Скачать руководство пользователя страница 14

SAMPLE OF THE TEST MENU

             TEST MENU    

    

Head Type: Rohm2
File Name: TEST1
Printhead Set Temperature: 35
Image Width: Full

     

Choose from:                      current values

F1  - Reset to default values
F2  - Pattern type                 50%         
F3  - Dot pulse Duration (Ton)     Seq up to 0.50 msec      
F4  - Cycle Time (Tcycle)          5.0 ms      
F5  - Media Type                   ATL-693 
F6  - Head Heating(ON/OFF)         ON
F7  - Wait for Temperature         NO
F8  - Configure Output Image
F9  - Do the Above Defined Test
F10 - Exit to Main Menu - caution choices will not be saved

USING FUNCTION KEYS

Choosing  F2,F3,F4,F6  or  F8   results   in a request to input an appropriate value and a return to
the TEST EDITOR MENU.

      
      

Parameter  sequencing  may  be selected for choices F2,F3,  or F4.  This  choice  produces  ten 
samples  down the page with the first sample  printed  at 10% of the final value,  the second at
20% and so  on  down  the   page.   Sequencing   of a test pattern is only available when the
Checker board pattern is selected.

      
      

Changing  the  desired  Test  pattern  is done by selecting the F2 option  and  choosing  one of the
supported test patterns from the displayed Menu.

       
      

Selecting  the  F8  option  (Configure Output Image) from the TEST MENU  will  allow  an 
operator to alter the image header width or change the test patterns image width.

       
      

NOTE: The following conditions automatically invoke the REDUCED printing mode.       

- Pattern Sequence tests
- Hi Speed TCYCLE Sequence 
- Any test session where the defined TCYCLE value is less than 2.0 msec.

    

Also, due to differences in the construction of thermal printheads for various manufactures,
the width of the REDUCED print area is not the same for all printheads.

       

     

For Example:               

Reduced print width

       

     

Kyocera KST-216-8MPD1            

4 inches

     

Rohm    KF-2008-B1             

2.66 inches

    

Содержание 200























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды