Atlanta 1335ET, Техническое руководство и перечень запасных частей

Страница: 24 / 60

Technical Manual & Parts Lists
Page
19
7) The display will change to “2.0.0.” this is a
parameter number “200”. Any number with the “.”
between the digits will be a parameter. To move o
the correct parameter you will press either the “+”
or “
‐
” buttons. Press nd hold the “+” button, the
parameter numbers will start scrolling faster the
longer the button is held down, until “2.9.0.” is
displayed. This is the first parameter to be
programmed when starting new, only using as an
example. (You may need to access a different
parameter number, use the same method as above)
8 ) With “2.9.0.”(or parameter number you chose)
in the display, which is parameter “290”, press the
“E” button once.
9) The display will change from “2.9.0.” to “05”
(your display may not be the same, depends on the
type of sewing head being used, refer to your
machines programming sheet in manual) this is the
setting of parameter “2.9.0.” all displayed numbers
without the “.”are values of parameters. To change
this number use the “+” or “
‐
” button. Then press
the “E” button once.