Atlanta Attachment Company 4300A, Техническое руководство и перечень запасных частей

Страница: 42 / 132

Technical Manual & Parts Lists
35
2.8.- Maintenance
It is important that the machine operator read this manual and is familiar with all the functions
and safety concerns of the unit before operating.
General Safety Instructions
The machine shall be switched off, come to a standstill and be secured so that it cannot be switched on
again inadvertently before starting any maintenance work whatsoever. Use proper lockout/tag out
procedures to secure the machine against inadvertent startup. Remove any oil, grease, dirt and waste
from the machine, particularly from the connections and screws, when starting the maintenance and/or
repair work. Do not use any corrosive-cleaning agents. Use lint-free rags. Retighten all screw
connections that have to be loosened for the maintenance and repair work. Any safety mechanisms that
have to be dismantled for setting-up, maintenance or repair purposes must be refitted and checked
immediately after completing the work
2.8.1.- Daily (8 -10 hrs. of operation)
• Follow manufacturer’s recommendations and guidelines for
operation, maintenance, and lubrication of the sewing head.
• Check for proper oil level and/or flow in the sewing head and
other oil filled or lubed equipment, fill as needed. Oil all points
as indicated.
• Clean the machine at the end of every shift or as excess
materials accumulate.
• Clean lint, waste, etc. from the sewing, looper(s) and
needle(s), area as it accumulates, remove or open covers as
necessary for access.
• Remove any threads or other material(s) wrapped around or
between any moving parts.
• Wipe all photocell lenses with a clean non-abrasive dry cloth.
• Use a soft cloth for cleaning to clean all reflective tapes. Do
not use chemicals or abrasives to clean it. Avoid any contact
with oils and liquids. Do not touch the tape with bare fingers. If
tape is dirty or opaque, the eye may not function correctly.
• Open or remove doors and/or covers and inspect belt(s) for debris or wear and clean or replace as
necessary.
• Monitor the air pressure filter/regulator and empty as necessary.
• Investigate and report any unusual noises to the proper personnel.
From
the
library
of:
Diamond
Needle
Corp