
Technical Manual & Parts Lists
26
6.
Using the Left Head Adjustment Crank set the Left head to the desired finished width, Feed
fabric through guide assembly: over first bar, under second, then into the front guides on the
main frame, across.
7.
Place the leading edge of the fabric
under the foot of the right sewing
head. Turn the head over by hand
and
check
for
interference
problems and make sure machine
is forming a stitch.
8.
Using the foot pedal, run the
right head and gently pull the
fabric until the leading edge of the
fabric is at the foot of the left
head.• Place the leading edge of
the fabric under the foot of the left
sewing head.
9.
Turn the head over by hand and check for interference problems and make sure machine is
forming a stitch.
10.
Using the foot pedal, run both heads and gently pull the fabric until the leading edge the fabric
is between the feed rollers through the guillotine and stop with the end of the border protruding
slightly beyond the knife blades. Adjust the guides to fit the border size. Hold the border in place
and press the "CLOSE ROLLERS" button.
11.
On “OPERATOR SCREEN” press “BORDER CHOP CYCLE” to release
the first piece of border.
NOTE:
If you get a message “Border Slack Warning” on the screen, walk over to Pre-feed part of the
machine and press the “OPEN ALL ROLLER” push button mounted on the cover of the Pre-feed roller,
pull the slack out, and press the button again to lower the Pre-feed roller.
If the message “Border Slack Warning” comes up again with no slack present, most likely the slack eye
is not adjusted properly to see the reflective tape on the side panel of the machine, or that the eye is not
working properly and needs to be checked.
From
the
library
of:
Diamond
Needle
Corp
Содержание 4300A
