Atlanta Attachment Company 1390HCB Скачать руководство пользователя страница 13

Страница: 13 / 147

Technical Manual & Parts Lists

- Kinetic energy - Note that some motors or spindles, for example, may continue to run or coast run on

after being switched off.

- Potential energy - Individual assemblies may need to be secured if necessary for repair work.

Delivery of the Machine/Packaging

Note any markings on the packaging, such as weights, lifting points and special information. Avoid

temperature fluctuations. Condensation may damage the machine.

Transport Damage

The packaging and machine must immediately be examined for signs of damage in transit. Such damage

must be reported to the shipper/transporter within the applicable time limits. Contact Atlanta Attachment

Company and/or your transport insurer immediately, if signs of damage are visible. Never operate a

damaged machine.

Interim Storage

If the machine has to be stored temporarily, it must be oiled or greased and stored in a dry place where it

is protected from the weather in order to avoid damage. A corrosion-inhibiting coating should be applied

if the machine has to be stored for a longer period of time and additional precautions taken to avoid

corrosion.

Transporting the Machine

Disconnect the machine from all external connections and secure any loose assemblies or parts. Never

step under a suspended load. When transporting the machine or assemblies in a crate, ensure that the

ropes or arms of a forklift truck are positioned as close to the edge of the crate as possible. The center of

gravity is not necessarily in the middle of the crate. Note the accident prevention regulations, safety

instructions and local regulations governing transport of the machine and its assemblies.

Only use suitable transport vehicles, hoisting gear and load suspension devices that are in perfect

working order and of adequate carrying capacity. Transport should only be entrusted to duly qualified

personnel.

Never allow the straps to rest against the machine enclosure and never push or pull sensitive parts of the

machine. Ensure that the load is always properly secured. Before or immediately after loading the

machine, secure it properly and affix corresponding warnings.

All transport guards and lifting devices must be removed before the machine is started up again. Any

parts that are to be removed for transport must be carefully refitted and secured before the machine is

started up again.

Workplace Environment

Our machines are designed for use in enclosed rooms: Permissible ambient temperature approx. 5 - 40

°C (40 - 104 °F). Malfunctions of the control systems and uncontrolled machine movements may occur

at temperatures outside this range.

Protect against climatic influences, such as electrostatic charges, lightning strikes, hail, storm damage,

high humidity, salinity of the air in coastal regions.

Содержание 1390HCB




















































































































































Результаты поиска

Содержание 1390HCB

Отзывы:

Похожие инструкции для 1390HCB

Бренды по названию

Популярные бренды

Atlanta Attachment Company 1390HCB, Техническое руководство и перечень запасных частей

Результаты поиска

Содержание 1390HCB

Отзывы:

Похожие инструкции для 1390HCB

Бренды по названию

Популярные бренды