Atlanta Attachment Company 1390HCB Скачать руководство пользователя страница 10

Страница: 10 / 147

Technical Manual & Parts Lists

A Word to the Operator

The greatest danger inherent in our machines:

is that of fingers, hands or loose clothing being drawn into a machine by live, coasting or rotating tools

or assemblies or of being cut by sharp tools or burned by hot elements.

LWAYS BE CONSCIOUS OF THESE DANGERS

Safety Equipment on the Machines

All machines are delivered with safety equipment, which shall not be removed or

bypassed during operation.

The correct functioning of safety equipment on machines and systems should be

checked every day and before every new shift starts, after maintenance and repair

work, when starting up for the first time and when restarting (e.g. after prolonged

shutdowns).

If safety equipment has to be dismantled for setting-up, maintenance or repair work, such safety

equipment shall be replaced and checked immediately upon completing the maintenance or repair work.

All protective mechanisms shall be fitted and fully operational whenever the machine is at a standstill or

if it has been shut down for a longer period of time.

Damage

If any changes capable of impairing safety are observed in the machine or its mode of operation, such as

malfunctions, faults or changes in the machine or tools, appropriate steps must be taken immediately, the

machine switched off and a proper lockout tagout procedure followed. The machine should be examined

for obvious damage and defects at least once per shift. Damage found shall be immediately remedied by

a duly authorized person before resuming operation of machine.

The machine should only be operated when in perfect working order and when all protective

mechanisms and safety equipment, such as detachable protective mechanisms, emergency STOP

systems, etc. are in place and operational.

Faults or Errors

The machine must be switched off and all moving or rotating parts allowed to come to a standstill and

secured against accidental restart before starting to remedy any faults or errors.

Signs on the Machine

Safety and danger signs on the machine should be observed and checked at regular intervals to ensure

that they are complete and undamaged. They should be clearly visible and legible at all times.

Clothing, Jewelry, Protective Equipment

Long loose hair, loose-fitting clothes, gloves and jewelry, including rings, should be avoided in order to

avoid injuries due to being caught, drawn in and wound up inside the machine.

Содержание 1390HCB




















































































































































Результаты поиска

Содержание 1390HCB

Отзывы:

Похожие инструкции для 1390HCB

Бренды по названию

Популярные бренды

Atlanta Attachment Company 1390HCB, Техническое руководство и перечень запасных частей

Результаты поиска

Содержание 1390HCB

Отзывы:

Похожие инструкции для 1390HCB

Бренды по названию

Популярные бренды