Atlanta Attachment Company 1317A Скачать руководство пользователя страница 12

Страница: 12 / 110

Technical Manual & Parts Lists

Protect against influences from the surroundings: no structure-borne vibrations, no grinding dust, or

chemical vapors.

Protect against unauthorized access.

Ensure that the machine and accessories are set up in a stable position.

Ensure easy access for operation and maintenance (Instruction Manual and layout diagram); also verify

that the floor is strong enough to carry the weight of the machine.

Local Regulations

Particular attention must be paid to local and statutory regulations, etc. when installing machines and the

plant (e.g. with regard to the specified escape routes). Note the safety zones in relation to adjacent

machines.

Maintenance

General Safety Instructions

The machine shall be switched off, come to a standstill and be secured so that it cannot be switched on

again inadvertently before starting any maintenance work whatsoever. Use proper lockout/tagout

procedures to secure the machine against inadvertent startup.

Remove any oil, grease, dirt and waste from the machine, particularly from the connections and screws,

when starting the maintenance and/or repair work. Do not use any corrosive-cleaning agents. Use lint-

free rags.

Retighten all screw connections that have to be loosened for the maintenance and repair work. Any

safety mechanisms that have to be dismantled for setting-up, maintenance or repair purposes must be

refitted and checked immediately after completing the work.

Maintenance, Care, Adjustment

The activities and intervals specified in the Instruction Manual for carrying out adjustments,

maintenance and inspections must be observed and parts replaced as specified.

All hydraulic and pneumatic lines should be examined for leaks, loose connections, rubbing and damage

whenever the machine is serviced. Any defects found must be remedied immediately.

Waste, Disassembly, Disposal

Waste products should be cleared from the machine as soon as possible as not to create a fire hazard.

Ensure that fuels and operating lubricants, as well as replacement parts are disposed of in a safe and

ecologically acceptable manner. Note the local regulations on pollution control.

When scrapping (disassembling) the machine and its assemblies, ensure that these materials are disposed

of safely. Either commission a specialist company familiar with the local regulations or note the local

regulations when disposing of these materials yourself. Materials should be sorted properly.

Содержание 1317A















































































































Результаты поиска

Содержание 1317A

Отзывы:

Atlanta Attachment Company 1317A, Техническое руководство и перечень запасных частей, Страница: 12 / 110

Результаты поиска

Содержание 1317A

Отзывы: