manualshive.com logo in svg

ATL IP300S, Руководство пользователя, Страница: 20 / 100

Поделиться
Скачать
ATL IP300S Скачать руководство пользователя страница 20

 

IP SIP Phone v2

 User’s Guide 

Mar. 2005 

 

[20/100]

 

Alternatively, you mayo to 

『

Main Menu

』

=>”6.Network” / ”2.SIP settings” / ”1.1

st

 Realm” 

to configure these information by keypad. 

i.

 

If you have applied for more than one service domains, please repeat step I and II 
until all active domains are properly configured. 

IP SIP Phone

 supports three 

different service domains at most. 

ii.

 

After saving the configuration, the system will try to register to those activated SIP 
domains. The flashing green LED of 

【

Registration

】

 key indicates that the 

registration is undergoing. Once the green LED stops flashing, you could know the 
registration result by the LED. Please refer to section-10.11 “Registration on 
Demand” and section-10.12 “Multi-domain Registration” on this user’s guide for 
detail. 

iii.

 

If you failed to register your phone to SIP registrar, please refer to Appendix 
B-“Trouble Shooting” on this document. 

 

4.1.3.  Configure NAT and Firewall 

 

If your SIP server locates on public internet, whereas your phone resides on a local area 

Содержание IP300S





































































































Отзывы:

Нет отзывов