12
Contents
EC Declaration of Conformity
12
Extent of delivery
12
Characteristics noise values
12
Symbols machine / operating manual
12/13
Normal intended use
13
Residual risks
13
Safe working
13
Before the first start-up
15
Start-up 15
Working with the surface planing and thicknessing
machine
16
Maintenance and cleaning
18
Transport 18
Storage 19
Guarantee 19
Maintenance and cleaning schedule
19
Description of device / spare parts
20
Possible faults
20
Technical data
21
EC Declaration of Conformity
according to Directive 98/37 EC
ATIKA GmbH & Co. KG
Schinkelstraße 97 59227 Ahlen - Germany
declare under our sole responsibility, that the device
Surface planing and thicknessing machine
type MBY10 / model ADH 254 A
to which this declaration relates corresponds to the relevant
basic safety and health requirements of the Directive 98/37/EC,
and to the requirements for the other relevant Directives
2004/108/EG, 2006/95/EG
and that the above-named machine agrees with the model,
which received the EC type-examination certificate
BM 60017295 0001
Notified body:
TÜV Rheinland Product Safety GmbH
Am Grauen Stein, 51105 Köln
Notification number: 0197
Ahlen, 07.07.2008 A. Pollmeier, management
Extent of delivery
•
Surface planing and thicknessing machine ADH 254 A
•
Shavings exhauster hood
•
Shavings exhauster connector
•
1 push stick
•
Blade shaft guard
•
Guide plate
•
Stand
•
Installation tools
•
Fasteners
•
Operating manual
After unpacking, check the contents of the box
!
That it is complete
!
Check for possible transport damage
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
Characteristics noise values
EN ISO 3744
Machine used as surface planer and thicknesser with standard
cutting blades.
Noise power level
Sound pressure level
at the workplace
No-load L
WA
= 109,5
dB(A) L
pA
= 93,9 dB(A)
Load
Planing
L
WA
= 112,3
dB(A) L
pA
= 99,3 dB(A)
Load
Thicknessing
L
WA
= 111,3
dB(A) L
pA
= 97,9 dB(A)
The factor of measurement uncertainty is 2 dB.
The values given are emission values and must therefore not
simultaneously represent safe workplace values too. Although there is
a relationship between emission and immersion levels, it can be
reliably deduced whether additional precautionary measures are
necessary or not. Factors, which can influence the immersion level
currently existing at the workplace include the duration of the effects,
the special type of the workroom, other noise sources, etc. e.g. the
number of machines and other adjacent processes. The permissible
workplace values can also vary from country to country. This
information should however enable an improved assessment of the
danger and risk to be carried out.
Symbols machine
Carefully read
operator’s
manual and the
safety
instructions
before starting
the machine and
observe the
instructions when
operating.
Before starting any
repair,
maintenance or
cleaning work,
always switch off
the motor and
remove the plug
from the socket.
Risk of finger and
hand injury by
the cutting blade.
Do not expose to
rain. Protect
against humidity.
