Atid AT911N series, Руководство пользователя

Страница: 24 / 33

AT911N User Guide
24
1.3
Barcode Scanning
1. Please eliminate the protect film in front of scanner at the first.
2. Please run a barcode application program
3. Please use the scan bean to center of barcode
• Please adjust the range in accordance with barcode size
• It will stop to read if user deviates from reading range after 5 seconds
[ Correct way to read the barcode ]
1.Please bring it close to barcode in case of smaller barcode. This device can read the barcode
in range of 40~300mm. If you have failure to read the barcode, please do check the angle
and range
2. Laser beam will be shown up as a clear red line when using it at the barcode
[ Incorrect way to read the barcode ]
1. Laser bean have to be crossed in the barcode
2. If laser beam partly will be shown up on the barcode, it doesn`t work well.
1D
2D
1D
2D