Atid AT911N series, Руководство пользователя

Страница: 11 / 33

AT911N User Guide
11
1.2 Charging Battery
You have to charge it through dedicated adapter which is provided when you bought
Red light is lit on LED when it starts charging. It will be changed with green light in case of full

Connecting the adapter
1. Connect the adapter plug with 220V (or appropriate socket)
2.
Connect adapter DC cable with “Power Connecting Jack”
3. LED will be changed when the red light is lit on the LED
1.3 Low-Power Mode(Sleep-mode)
In case of that user doesn`t use the system when another program is implemented or main screen is
shown up as below, user can move into the state of low-power mode(Sleep-mode) by pushing
<Power> Button. If user wants to use the device once again, please push the <Power> button and
then wait until the main screen is shown up the device.

Use the Low-Power Mode (Sleep Mode) by using <Power> button
Move into the Low-Power Mode(Sleep-Mode) :
1. Device can move into the Low-Power Mode if user
pushes the <Power> button in state of power-on.
Cancel the Low-Power Mode (Sleep Mode) :
1. Power will be turned on when user pushes the
<Power> button in state of power-off

Caution:
User must use provided adapter with device. Otherwise your device might be damaged