25
AT188N Plus User Guide
6)
‘6. UHF Report’
: When transmitting UHF RFID Tag data, select whether to send only EPC data
or both EPC data and PC data.
7)
‘7. Discriminate’
: Select whether to use an identification number when transmitting data to the
host device. It does not apply in ‘Interactive Mode’.
8)
‘8. Input ID’
: Enter the identification number to be used. It can be set from 1 to 999 and works
only when ‘Discriminate Mode’ is set.
5.
‘5. System’
Set functions such as time, buzzer, vibrator, screen, and Scan LED.
1)
Clock : Set the current time of this unit. The set time can be used with Barcode or RFID tag
information.
Time data may have time differnece, so please reset it periodically.
2)
Power down : When the device is not used for a while, user can select the time when the power is
automatically turned off when left unused. The currently applied setting is preceded by a ‘ * ’. Move
to the option you want to select and press the ‘Scan button’ to set it
.
•
User
can select a set value from ‘1 min, 2 min, 5 min, 10 min, 30 min, 60 min, 120 min, None’
.
•
Power is automatically turned off after a set time from the time the screen is turned off.