20
AT188N Plus User Guide
•
BARCORDE
–
RFID : This is a mode where barcode and RFID can be selected on the
‘
Scan Ready
’
screen. To switch between the two modes, press the
‘▲
Button
’
in the
‘
Scan Ready
’
state. The
currently set mode is indicated by an icon in the status display area.
•
BARCORDE + RFID :
When the ‘Scan
B
utton’ is pressed, barcode and RFID tag data are
simultaneously recognized.
2)
Mode
Set the Report Mode of RFID. It sets the way to process the read data. User can set whether to operate
continuously or whether to double check.
•
MULTI : Recognizes all surrounding tags, but recognizes the same tag only once.
•
SINGLE : When one RFID tag data is recognized, operation is stopped.
•
MULTI Repeat : Recognizes all surrounding RFID tag data and duplicates even the same RFID
tag.
3)
TYPE : Set 6C and 6B among UHF RFID standards.
AT188N Plus only supports 6C tag reading function.
4)
POWER : Adjust the radio wave output strength of the RFID module