19
AT188N Plus User Guide
Device Setting Mode
–
Setup Param
User can enter the device setting mode by pressing the
‘▲
button
’
and
‘
Scan button
’
at the same time
when the power of the device is turned off. Among the activated menus,
‘
2. Setup Param
’
to enter the
device setting menu. There are total of 7 selectable menus. Each menu is as follows.
1.
‘1.
Barcode
’
1)
User can select whether to recognize the Barcode Symbol supported by the barcode module.
2)
Depending on the type of barcode module and supported functions, the items that can be set are
changed.
3)
Enabled Symbol items are marked with ‘
*
’.
2.
‘2.
UHF RFID
’
Set the operation mode for Barcode and UHF RFID functions. It also sets the basic functions of the UHF
RFID module. Each menu has submenus.
1)
READER
Set barcode and RFID operation mode according to scan button input.
•
BARCODE : It is set to barcode-o
nly mode, and when the ‘Scan
B
utton’ is pressed, only the
barcode operates.
•
UHF RFID : It is set to RFID-
only mode, and when the ‘Scan
B
utton’ is pressed, UHF RFID operates
.