MC DTC Series
– User manual
44 / 51
3. Remove the earth wire and the connector, connect these to the new printhead, make a note of the print head
serial number and click
Next
.
4. Insert the new print head.
During re-insertion, press the sphere present in the tip of the print head on the point indicated below and
rotate it slightly to insert it in its housing. Close the top cover, then click
Next
.
5. Connect the printer to the power supply, switch it on and connect it to a computer with the USB cable.
Click
Next
to continue, then enter the
Print Head Serial Number
and confirm with the
Set
button.
6. Click
Finish
to complete the print head replacement operation
Print head serial
number
