ATI
Q46P pH System
Part 2 – Mounting
11
O&M Manual
Rev-F (8/17)
2.2
Wall or Pipe Mount
A PVC mounting bracket with attachment screws is supplied with each transmitter. The multi-
purpose bracket is attached to the rear of the enclosure using the four flat head screws. The
instrument is then attached to the wall using the four outer mounting holes in the bracket. These
holes are slotted to accommodate two sizes of u-bolt that may be used to pipe mount the unit.
Slots will accommodate u-bolts designed for 1½ “or 2” pipe. The actual center to center
dimensions for the u-bolts are shown in the drawing. Note that these slots are for u-bolts with ¼-
20 threads. The 1½” pipe u-bolt (2” I.D. clearance) is
available from ATI in type 304 stainless
steel under part number (47-0005).
Figure 2 - Wall or Pipe Mounting Bracket
