©
A
TL
A
g
ricu
ltu
ra
l
Te
ch
n
olog
y
L
imite
d:
S
e
pte
mbe
r
2
0
2
1
56
| Micro M5 Manual | v2.0
Rotary Gap Settings
The Gap settings for Gaps 1 through 5 allow the user to input up to 5 Gaps in the parlour, these gaps allow
the identification, feeding and bonker to remain in sync when the gaps pass the entry.
Press the Change key
to change the setting, the control will then ask for the start offset.
Use the number keys to set the offset and press the Enter key
to save.
The control will then ask for the end offset;
Use the number keys to set the offset and press the Enter key
to save.
Press 2 or the 6 key to step to the ID Offset setting.
Setting the Identification Offset
The identification offset allows the users to offset the identification entry stall, this is useful when setting up
the parlour and allows the entry stall to be moved without having to relink the stall tags.
Press the Change key
to change the offset.
Use the number keys to set the offset and press the Enter key
to save.
Press 2 or the 6 key to step back to the Bonker setting.
Innovation In and Out of Parlour
GAP 1 000 TO 000
GAP 1 END ___
Change
Delete
GAP 1 START ___
or
2
é
ABC
6
è
MNO
Enter
Setup
Enter
Setup
ID OFFSET 0
or
2
é
ABC
6
è
MNO
Enter
Setup
Change
Delete
