24 Installing the Hardware and Software
8
After Windows 2000/Windows XP reboots, the
Found
New Hardware
message displays the
Digital Signature
Not Found
dialog and prompts you
Do you want to
continue the installation?
Click
Yes
to install and
start the drivers.
9
Click
Start > Settings > Control Panel > Display >
Settings
, or right-click on the Windows desktop, select
Properties
and
Settings
.
10
Set the resolution (
Screen area
), and color depth that
best suit your requirements and your monitor's
performance.
11
Click the
Advanced
button and select the
Monitor
tab.
12
Set the refresh rate for the monitor connected to the Fire
GL 8700 graphics accelerator in your system.
Note
:
If you have two monitors connected the refresh rate
the refresh rate setting applies to the monitor connected to
the VGA connector. Use the
ATI Monitor
and
DualScreen
dialogs to adapt each monitor's settings in a
dual-monitor configuration.
13
Click
OK
until you are on the Windows desktop.
Note
Refer to your Windows online help and
documentation for further information on using the
Monitor
and
Settings
dialogs.
