Installing the Hardware and Software 21
HYDRAVISION
TM
Desktop Management
The HYDRAVISION
TM
desktop management software will
install automatically with the standard driver installation of the
Quick Start program. If you do not want to install
HYDRAVISION
TM
select the
Custom
driver installation and
deselect HYDRAVISION
TM
.
ReadMe file
Select
Readme
from the
Fire GL CD
start menu to display a
readme file. Refer to this file for additional and ‘last minute’
information. Information in this file may not appear in printed
documentation or online help.
Driver installation dialog
The installation dialog will display in English if your operating
system’s language is not supported.
Software Installation for Windows NT4.0
1
Run the Quick Start utility. The Quick Start utility will
start automatically, if you insert the Fire GL CD into your
CD-ROM drive after the operating system has started. If
your CD-ROM auto-run is not enabled and/or the Quick
Start program does not start automatically:
Click the
Start
button in the task bar, click
Run
, and then
select
START.EXE
from the root directory of the Fire GL
CD.
2
Click
Start Installation
.
Note
If your Windows NT 4.0 is not correctly updated with
Service Pack 5, you are prompted if you want to
install the drivers and Service Pack at this time – if
the appropriate language version is available on the
Fire GL CD.
If the Fire GL CD cannot install the Service Pack to
your system, the driver installation stops. Obtain
Windows NT Service Pack 5 (or higher) from
Microsoft, update your Windows NT 4.0, and run the
Quick Start utility again
