Installing the Hardware and Software 17
Connecting a Digital Flat-Panel (DFP) Monitor or
Digital CRT Monitor
Securely attach the monitor’s data cable to the DVI output
connector (2) on the card. Attach the cable to the monitor
according to the monitor's instructions. Please refer to the
documentation that came with your monitor if you need
additional installation information.
Setting the Monitor Impedance
If you can switch the impedance values on your monitor, use
the following recommended settings:
•
RGB video input: 75 Ohm
•
Sync: 2.2 kOhm
Try other 'Sync' settings if you cannot achieve a stable video
image.
If the impedance setting options are 'High' and 'Low' only, try
the setting that provides the most satisfactory monitor display.
