Manual, Robotic Deburring Tool, RCV‑490 Series
Document #9610‑50‑1032‑06
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 USA • Tel: +1.919.772.0115 • Fax: +1.919.772.8259 • www.ati‑ia.com
6
1. Safety
The safety section describes general safety guidelines to be followed with this product, explanations of the
notifications found in this manual, and safety precautions that apply to the product. Product specific notifications
are imbedded within the sections of this manual (where they apply).
1.1 Explanation of Notifications
These notifications are used in all of ATI manuals and are not specific to this product. The user should heed
all notifications from the robot manufacturer and/or the manufacturers of other components used in the
installation.
DANGER:
Notification of information or instructions that if not followed will result in
death or serious injury. The notification provides information about the nature of the
hazardous situation, the consequences of not avoiding the hazard, and the method for
avoiding the situation.
WARNING:
Notification of information or instructions that if not followed could result
in death or serious injury. The notification provides information about the nature of the
hazardous situation, the consequences of not avoiding the hazard, and the method for
avoiding the situation.
CAUTION:
Notification of information or instructions that if not followed could result
in moderate injury or will cause damage to equipment. The notification provides
information about the nature of the hazardous situation, the consequences of not
avoiding the hazard, and the method for avoiding the situation.
NOTICE:
Notification of specific information or instructions about maintaining, operating,
installing, or setting up the product that if not followed could result in damage to equipment. The
notification can emphasize, but is not limited to: specific grease types, best operating practices,
and maintenance tips.
1.2 General Safety Guidelines
The customer should first read and understand the operating procedures and information described in this
manual. Never use the RCV‑490 for any purpose not explicitly described in this manual. Follow installation
instructions and pneumatic connections as described in this manual.
All pneumatic fittings and tubing must be capable of withstanding the repetitive motions of the application
without failing. The routing of pneumatic lines must minimize the possibility of stress/strain, kinking,
rupture, etc. Failure of critical pneumatic lines to function properly may result in equipment damage.
1.3 Safety Precautions
CAUTION:
Do not use burs rated for less than the speed of the RCV‑490. Using these
too may cause injury or damage equipment. Always use burs rated for at least the
speed of the RCV‑490.
CAUTION:
Do not use serviceable parts other than original ATI serviceable parts. Use
of serviceable parts not supplied by ATI can damage equipment and void the warranty.
Always use original ATI serviceable parts.
CAUTION:
Do not perform maintenance or repair on the deburring tool product
unless the tool is safely supported or placed in the tool stand and air has been turned
off. Injury or equipment damage can occur with tool not placed in a tool stand and
air remaining on. Place the tool safely in the tool stand and turn off the air before
performing maintenance or repair on the deburring tool product.
