manualshive.com logo in svg

ATI Technologies 9150-CRT, Руководство по эксплуатации продукта, Страница: 12 / 31

Поделиться
Скачать
ATI Technologies 9150-CRT Скачать руководство пользователя страница 12

Manual, Compliant Reciprocating Tool, CRT Series
Document #9610-50-1028-04

Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 USA • Tel: +1.919.772.0115 • Fax: +1.919.772.8259 • www.ati‑ia.com

12

3.6  Side Mounting Installation

CAUTION: 

The length of the fasteners should not interfere with the compliant motion of 

the air motor spindle. Refer to 

Section 9—Drawings

 for the maximum fastener length. 

Do not use fasteners that exceed the maximum length; otherwise, damage will occur.

CAUTION: 

Lock washers are recommended on all mounting fasteners. Liquid thread 

lockers should not be used for the mounting fasteners as this may damage or remove 
thread inserts during disassembly.

The side mounting pattern of the CRT consists of (2) dowel pin holes and (4) threaded holes (refer to 

Figure 3.2

 and 

Section 9—Drawings

). An optional bench mount adapter plate allows the CRT to attach to a 

bench or other work surface. The bench mount adapter may also be used with intermediate plates to attach 
the CRT to a robot flange or to an ATI Tool Changer. If the CRT is permanently mounted to a work surface, 
the robot carries the part to the reciprocating tool to be deburred.

Figure 3.2—Side Mounting Installation

(4) M6 Socket Head Cap Screw

Bench Mount

Adapter (Optional)

(4) M6 Socket Head 
Cap Screw

Side Mounting

Содержание 9150-CRT
































Отзывы:

Нет отзывов