Manual, Compliant Reciprocating Tool, CRT Series
Document #9610-50-1028-04
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 USA • Tel: +1.919.772.0115 • Fax: +1.919.772.8259 • www.ati‑ia.com
10
3. Installation
The CRT is delivered fully assembled. Optional equipment, such as: mounting adapter plates and files will be
sold separately.
3.1 Protection During Transportation
The CRT is packaged in a crate that secures and protects the tool during transportation. Always use the crate
when storing and transporting the CRT in order to minimize the risk of damage.
3.2 Inspection of Condition When Delivered
The following should be checked upon receipt of the CRT:
•
Delivery in accordance with freight documents
•
Packaging is in good condition
If there is damage to any of the packaging, or if any of the goods have been exposed to improper handling,
unpack those parts that may have been damaged for a closer inspection. Notify ATI for assistance in the
evaluation of the product condition, if necessary.
3.3 Unpacking and Handling
The CRT should always be placed inside the accompanying crate while storing and handling.
Pneumatic lines are attached, bundled, and must be strain‑relieved in a manner that allows for freedom of
movement during operation.
3.4 Storage and Preventive Maintenance During Storage
The CRT should always be stored in its crate, when not in use. The CRT should be stored in a dry place. For
long‑term storage, the CRT should be thoroughly cleaned of any burrs or debris. Do not disassemble the
CRT. Place the CRT within a sealed plastic bag inside the crate.