Athena UPS APA-103T, Руководство пользователя

Страница: 25 / 34

24
2. By pressing the Enter- key and the Down-key simultaneously for 3 seconds
until the buzzer beeps twice, the UPS will start up and Normal LED lights up to
indicate the power is from its inverter to the load.
3. When the LCD Select Down-key and the LCD Select Up-key are pressed
simultaneously for 3 seconds until the buzzer beeps twice, the inverter will be
turned off and the UPS is on the standby status (LCD display illuminates and
Normal LED is blinking) until AC source is disconnected.
6.3 Storage Instruction
Disconnect input power in rear panel if you will not use it for long period. If the
UPS is stored over 3 months, please keep supplying power to the UPS for at least
24 hours to ensure that battery is fully recharged.
6.4 LCD Display
Use (2) Up Key/ (3) Down key to select menu-displays of the LCD described
below. This screen will refresh once the system power is enabled.
Note: Following menus are based on 220V system. To 110V system, menus are
same with 220V system except voltage values have some difference.