ATH-Heinl Cross Lift 50+, Руководство по эксплуатации

Страница: 81 / 514

® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
Manufacturer ATH-Heinl GmbH & CO.KG
- 15 -
1.4 Technical Data
Model ATH Cross Lift 50 Plus
Load capacity of main lift 5,000 kg
Load capacity of wheel-free lift 4,000 kg
Lifting time (2,000 kg) 70 s
Lowering time (2,000 kg) 60 s
Electrical system 3/400 V/50 Hz
Control voltage DC 24 V
Motor 3.5 kW
rpm 1375
Upstream fuse 3 C 16 A
Connection cable Min. 5 x 2.5 m²
Protection type IP 54
Flow rate 4.8 cm³/U
Working pressure ² 240 bar (max. 300 bar)
Required compressed air
connection
8 bar
Recommended hydraulic oil Summer (15 °C to 45 °C): HVLP-D 46 (e.g.: Eni PRECIS HVLP-
D)
Winter (under 10 °C): HVLP-D 32 (e.g.: Eni PRECIS HVLP-D)
Oil quantity Approx. 18 l
Floor anchor Bolt anchor: M16 x 180 (e.g. Atrion ABL-W 16-060-180)
Compound anchor: M16 x 190 (e.g. Atrion AVA-W 16-045-190)
Number of anchors 16 units
Permissible sound level ≤ 80 dB
Weight 2,840 kg
²
The factory-set working pressure is adjusted to the maximum rated power. The pressure relief valve
must not be manipulated. Changing the settings can lead to serious damage.
If the indicated rated load cannot be lifted, please contact our service team.
1.4.1 Technical Data – Play Detector
Type / actuation Hydraulic
Maximum axle load 2600 kg
Actuating force per plate 8 kN
Speed of movement 50 mm/s
Transverse movement 80 mm per plate, inverse
Longitudinal movement 50 mm per plate, inverse and parallel
Control voltage 3/400 V/50 Hz
Motor 1.1 kW
rpm 1400
Upstream fuse 3 C 16 A
Connection cable Min. 5 x 2.5 m²
Protection type IP 54