® Copyright ATH-Heinl GmbH & Co. KG, 2018, All rights reserved. / Misprints and technical changes reserved / Issue: 08/2014
32
Emergency lowering in case of power failure
1. Switch off the lift and secure it against restart.
2. For relieving the notches press the emergency hand pump.
If there is no emergency hand pump raise both drive-on ramps with a suitable means appr. 30 mm.
3. Release and fix the safety notches manually and lower the lift.
4. Turn the emergency down screw on the lowering valve slowly counterclockwise.
5. After the lift is completely lowered, close the emergency down screw by turning it clockwise.
