® Copyright ATH-Heinl GmbH & Co. KG, 2012, All rights reserved. / Misprints and technical changes reserved / Stand: 10/2013
29
3. Parking the vehicle
a. Up to a lifting height of 500mm automatically intervenes the safety notches.
b.
Pressing the push button „LOCK UP“ for few seconds, lowers the carriages in the nearest safety notches.
Pay attention to the height level.
The parking position reduces the pressure into the hydraulic circuit (hydraulic circuit and hoses), thus increasing
the working live and reduces the wear of the lift.
4. Lowering the vehicle
a. Before lowering the lift check that there are not obstructions under the vehicle or the lifting arms.
b. Press and keep
the push button „ LOWERING“ pressed, the lift raises few seconds, unlocks the safety
notches and lowers.
c.
After is reaching the CE safety height , release the push button „ LOWERING“ and press the push button
„LOCK UP“ for completely lowering.
5. Driving Out
a. Lower the lift completely.
b. Turn down the lifting pads and swing the lifting arms back to 90° position.
c. Drive the vehicle out of the lift.
