I. Product description
Crimp the below shown ring terminals on the end of the AC input wires and PE
wires.
Connect the wires into the terminal block of the chargepoint as below.
Check the wiring then close the switch and the door.
Fig: AC Surge protection device
Note: The charging equipment will detect the current status of the lightning
arrester module in real time. When the lightning protection module is damaged,
the display will have an alarm indicating that the lightning protection device is
faulty. When repairing and replacing the lightning protection module. Then the
maintenance person can operate the breaker in the surge protection circuit and
replace the lightning protection module.(The red circle in the figure is the lightning
protection status indicator. When the indication window indicates green, the
lightning protection module is normal; when the indication window indicates red,
the lightning protection module has been broken and damaged, and the lightning
protection module needs to be replaced.)
Internal view and terminal definition
1.Breaker in surge protection circuit;
2.SPD
3.AC input terminal block. Terminal definition is
(
①
L1
;
②
L2
;
③
L3
;
③
N
) from left to
right;
4.PE terminal;
1. CHAdeMO connector indicator(charging yellow/fault red)
2. Power indicator
3. CCS connector indicator(charging yellow/fault red)
4. HMI
5. Emergency stop button
6. RFID reader
7. CHAdeMO
8. CCS