ATEN VS0801HB, Руководство пользователя

Страница: 11 / 31

VS0801HB User Manual
3
Planning the Installation
Required Equipment
Š
1 ~ 8 source devices equipped with an HDMI Type-A connector
Š
1 display device equipped with an HDMI Type-A connector
Š
1 ~ 8 HDMI cables (each not exceeding 3 m) to connect the VS0801HB to
source devices
Š
1 HDMI cable (not exceeding 3 m) to connect the VS0801HB to the display
device
Note:
Š
You can connect a DVI source to the VS0801HB via a DVI to HDMI
adapter.
Š
ATEN strongly recommends that you use high-quality HDMI cables of
appropriate length since this will affect the quality of the audio and video
output. Contact your dealer to purchase the correct table sets.
Optional Equipment
To control the VS0801HB using RS-232 serial commands, prepare the following
equipment:
Š
1 hardware controller, e.g. a PC
Š
1 serial cable with a 9-pin male connector