ATEN VP2730, Руководство пользователя

Страница: 69 / 130

VP2730 User Manual
61
power on|off
Power on or off the VP2730.
Note: The command will be ignored if it is not
inputed within 0.3 second. Please copy and
paste the command so that the command can
be inputed quickly.
read
Display the EDID mode for all output ports,
device information (device name, vendor,
firmware version, serial number, hardware
version, build version), input-to-output
assignment, and network settings.
reset
Reset the VP2730 to its default settings.
roomcode
{on|off|refresh}
Enable/disable/refresh room code.
For example, type:
roomcode on
scalemode
Show the display ratio for each connected
display.
scalemode
o<output_port>
{full|fit|cut}
Configure the display ratio of the source
connected to the specified port.
Š
full
: Set the display to full screen.
Š
fit
: Proportionally scale the content to fit
the screen without cutting any content off.
Š cut
: Scale the content to fully fill the display
with some content cut off.
For example, type:
scalemode o<output_port>
full|fit|cut
scaling
Display the current scale setting.
Command Syntax Description