Chapter 3. Front Panel Configuration
19
2. Press pushbuttons 1–4 to make your selection.
EDID Mode options are:
3. Press
Menu
to return to the Menu page.Press
Cancel
to return to the
previous level of menu.
CEC
To configure the CEC setting, do the following:
1. From the Operation Mode page, press pushbutton
2
:
2. Press pushbuttons (1–8) or (1–4) to enable (
ON
) or disable (
NA
) the CEC
feature for the output port. If the port does not support CEC, an
NA
is
shown.
Note:
The default CEC setting is NA.
3. Press
Menu
to return to the Menu page.Press
Cancel
to return to the
previous level of menu.
EDID Option
Description
1:
Port1
The EDID from port1 is passed to all video sources.
2:
Default
The default EDID is passed to all video sources.
3:
Remix
Uses the EDID of each connected display according to its
connection when the VM5404HA / VM5808HA is first powered
on, or immediately after pressing 3 to select the Remix option.
4:
Customized Automatically retrieves and saves the EDID settings of a
connected monitor/display device to an input source port. This
can be configured using the Browser GUI. See
1: Port 1
3: Remix
2: Default (In use)
4: Customized
1: EDID Mode
2: CEC
8: Next
OUTPUT 1 2 3 4 5 6 7 8
NA ON ON NA ON NA ON NA
