ATEN VE829, Руководство пользователя

Страница: 30 / 42

VE829 User Manual
22
To add another Transmitter to a Receiver, do the following steps:
1. Make sure Transmitter 1 is powered off. Press Transmitter No. on the IR
remote control (pointing to the Receiver).
2. Press the Up / Down button on your remote control and go to SETUP ,
press OK .
3. Select Add New Transmitter . The VE829R starts searching for
Transmitters within range.
Note: Press Transmitter No. key to exit the Searching screen.
During this period, press and hold the Power pushbutton on the top panel
of the Transmitter you want to add, then power it on. Hold the power
button down until the Power LED on the Transmitter starts to blink
(orange), which indicates that the unit has entered Connecting Mode. Once
the process is successful, the OSD displays Transmitter 2 on screen.
Note: Refer to Naming Source Devices , page 18 for details on how to edit
the name of a Transmitter.
4. After successfully connecting the Receiver with Transmitter 2, you can
now power on Transmitter 1. The Receiver can be linked with either
transmitters (1 and 2), which can be selected through the
Transmitter No.
button on the remote control.
Note: 1. To add more transmitters, repeat steps 1 to 4.
2. Although you can connect the Receiver with multiple
Transmitters, only one Receiver can operate at a time.
3. If you have more than one pair of this product, each Transmitter
and Receiver should be at least 6.5 feet away from one another.
4. When Receiver 1 is connected to Transmitter 2, the original
receiver paired with Transmitter 2 (Receiver 2) gets
disconnected. You need to pair Transmitter 2 to Receiver 2 again
to use them together. See
Device Pairing , page 18 for details.