After Windows comes back up:
1.
Open the Network folder: My Computer
Î
Control Panel
Î
Network
2.
In the Installed Network Components panel:
a)
Click on TCP/IP (Shared)
Î
[Network Adapter]*
b)
Click on the WINS tab; select Disable WINS Resolution
c)
Click on the IP Address tab; select Specify an IP Address; enter
the IP Address and the Subnet Mask (if they are not already
specified), that the Bridge computer uses on the Ethernet LAN.
If you do not know what the IP Address and Subnet Mask
numbers are, get them from your network administrator.
d)
Click on the Gateway tab; enter the Gateway address from the
LAN to the Internet (if it is not already specified). If you do not
know what the Gateway address is, get it from your network
administrator.
*
The term Network Adapter refers to the network adapter card
protocol that the computer uses. The name of the actual
network card protocol (NE2000 Compatible, for example) will
appear here.
3.
In the Installed Network Components panel, Click on TCP/IP
(Home)
Î
PC-Linq/Net USB Network Adapter, and make sure
that the IP address has been set for 192.168.0.1, and the Subnet
Mask has been set for 255.255.255.0
4.
Open Control Panel
Î
Internet Options:
a)
Select the Connections tab
b)
Click on the LAN Settings button
c)
Enable Automatically detect settings
11
