1. USB to Ethernet:
The Bridge Computer:
1.
Install the USB Network Cable driver according to the instructions
for Basic Peer to Peer installation, above, except for step 2-d.
2.
When asked if you want to install the Network Bridge (step 2-d),
Click on Yes.
The Remote Computers:
The Remote systems are the workgroup computers that connect to
the Ethernet LAN via the Bridge computer. For each system, install
the USB Network Cable driver according to the instructions given for
Basic Peer to Peer installation, above.
Setup Complete
Once the Setup has been completed, members of the Peer network
can:
See all the computers on both networks (the USB Peer LAN and
the Ethernet LAN), in the Network Neighborhood folder.
Share programs, files, and peripheral devices via the standard
Windows interfaces (i.e., Windows Explorer and Network
Neighborhood).
2.
USB to Internet via Ethernet LAN Using Static IP
Addresses
The Bridge Computer:
1.
Install the USB Network Cable driver according to the instructions
given for Basic Peer to Peer installation, above, except for step 2-
d.
2.
When asked if you want to install the Network Bridge (step 2-d),
Click on Yes.
3.
When done, open the Network folder: My Computer
Î
Control
Panel
Î
Network
8
