ATEN SN0108CO, Руководство пользователя

Страница: 85 / 178

Chapter 6. Port Access
69
Use the radio buttons to configure access rights on the User Access and Group
Access page. The meaning of the columns are given in the table, below:
User Access Each User created on the Serial Console Server (excluding Super
Administrator accounts) is listed to set access and configuration
rights for each device listed on the sidebar. Select a device from
the Sidebar to set the access and configuration rights of each
User.
Group Access Each Group created on the Serial Console Server is listed to set
access and configuration rights for each device listed on the
sidebar. Select a device from the Sidebar to set the access and
configuration rights of each Group.
Access Rights The Access columns are where access rights are set. The
meaning of each is explained below.
Full Access
The user can view the device and can
perform operations on the device.
View Only The user can only view the device; he
cannot perform any operations on it.
No Access The device will not show up on the
User's list on the Main Screen.
Config Sets or denies permission for the user to make changes to a
port’s configuration settings. A check mark
(
√
)
indicates that the
user has permission; an empty box means that the user does not
have permission.
Power Supply This column permits/restricts the configuration and power
operation of ports that have Power Over the Net™ devices
connected to them. A check mark
(
√
)
indicates that the user has
permission; an empty box means that the user does not have
permission.