ATEN SN0108CO, Руководство пользователя

Страница: 114 / 178

Serial Console Server User Manual
98
Note: The “MFG Number” (Manufacturing Number) is an internal serial
number used by ATEN’s factory and technical support staff to identify
products. This number does not affect products’ warranty. If your
product requires after-sales services, you may provide the MFG
Number to ATEN’s sales or technical support staff to identify the
product and model number.
The SN0108CO / SN0116CO / SN0132CO / SN0148CO are designed with two
power supplies. The Power Supply Detection section provides information
about the two Serial Console Server’s power supplies.

The icons for Power Supply 1 and Power Supply 2 display in gray when
there is no power to the power supply - they display in blue when power is
present.

When the
Power Supply Detection
function is enabled (there is a check in
the checkbox), when there is only one source of power, the Serial Console
Server will beep to warn you of the problem. The default for this function
is enabled.
If you are at the Local Console you will see a message asking you to
confirm that your intention is to only have one power source. If your
intention is to only have one source of power, there are two ways to stop
the beeping:
1) You can disable power supply warnings by unchecking the
checkbox. Do this if you want to disable this function on a permanent
basis.
2) You can confirm your intention in the dialog box. Do this if you only
want to disable the warning temporarily. With this method, the warning
function will be back in effect after the next system reset.
Mounted Devices
The
Mounted Devices
section displays information about USB and NFS
storage devices connected for use. When a USB drive is plugged into the front
of the Serial Console Server (SN0108CO / SN0116CO / SN0132CO /
SN0148CO only), or NFS storage locations are set (see
NFS Settings
, page 99),
they appear here with detailed information about the mounted device.