ATEN SN0108CO, Руководство пользователя

Страница: 123 / 178

Chapter 8. Device Management
107
3. If your server requires authentication, put a check in the
Server requires
authentication
checkbox, and key in the appropriate account
information in the
Account Name
and
Password
fields.
4. Key in the email address of where the report is being sent from in the
From
field.
Note: 1. Only one email address is allowed in the
From
field, and it
cannot exceed 64 Bytes.
2. 1 Byte = 1 English alphanumeric character.
5. Key in the email address (addresses) of where you want the SMTP
reports sent to in the
To
field.
Note: If you are sending the report to more than one email address,
separate the addresses with a semicolon. The total cannot exceed
256 Bytes.

Log Server
Important transactions that occur on the Serial Console Server, such as
logins and internal status messages, are kept in an automatically generated
log file.

To enable this, put a check in the
Enable report from the following Log
Server
checkbox.

Specify the MAC address of the computer that the Log Server runs on
in the
MAC address
field.

Specify the port used by the computer that the Log Server runs on to
listen for log details in the
Service Port
field. The valid port range is 1–
65535. The default port number is 9001.
Note: The port number must different than the one used for the
Program
port.