ATEN SN01 CO Series, Руководство пользователя

Страница: 121 / 174

Chapter 8. Device Management
107

SNMP Server
Up to four SNMP management stations can be specified. If you want to use
SNMP trap notifications, do the following:
1. Check Enable SNMP Trap and key in the Community.
2. Key in the IP address(es) and the service port number(s) of the
computer(s) to be notified of SNMP trap events. The valid port range is
1–65535. The default port number is 162.
Note: Make sure that the port number you specify here matches the port
number used by the SNMP receiver computer.
3. Key in the community value(s) if required for the SNMP version.
 To use SNMP V3, do the following:
1. Check Enable SNMP V3 .
2. Key in the Community values.
3. The client setting for the authorization protocol should only use SHA
and AES-128 encryption.