ATEN SN01 CO Series, Руководство пользователя

Страница: 112 / 174

Serial Console Server User Manual
98

When the Power Supply Detection function is enabled (there is a check in
the checkbox), when there is only one source of power, the Serial Console
Server will beep to warn you of the problem. The default for this function
is enabled.
If you are at the Local Console you will see a message asking you to
confirm that your intention is to only have one power source. If your
intention is to only have one source of power, there are two ways to stop
the beeping:
1) You can disable power supply warnings by unchecking the
checkbox. Do this if you want to disable this function on a permanent
basis.
2) You can confirm your intention in the dialog box. Do this if you only
want to disable the warning temporarily. With this method, the warning
function will be back in effect after the next system reset.
Mounted Devices
The Mounted Devices section displays information about USB and NFS
storage devices connected for use. When a USB drive is plugged into the front
of the Serial Console Server (SN0108CO / SN0116CO / SN0132CO /
SN0148CO only), or NFS storage locations are set (
see NFS Settings below ),
they appear here with detailed information about the mounted device.
NFS Settings
NFS (Network File System) allows you to mount storage devices across the
network. You can mount up to 4 devices. Fill in the
Source with the storage
devices network location (IP Address or Network Name) including the full
path of the location you want to mount. Next, click
Mount to mount the NFS
storage device. The Status column indicates N/A , Mounted , or Unmounted .
Unmounted shows if the storage device is not accessible. If this happens make