ATEN PE5220s, Руководство пользователя

Страница: 72 / 90

eco PDU PE Series User Manual
62
Š To help protect your system from sudden, transient increases and
decreases in electrical power, use a surge suppressor, line conditioner, or
uninterruptible power supply (UPS).
Š Position system cables and power cables carefully; Be sure that nothing
rests on any cables.
Š When connecting or disconnecting power to hot pluggable power supplies,
observe the following guidelines:
Š Install the power supply before connecting the power cable to the
power supply.
Š Unplug the power cable before removing the power supply.
Š If the system has multiple sources of power, disconnect power from the
system by unplugging all power cables from the power supplies.
Š Never push objects of any kind into or through cabinet slots. They may
touch dangerous voltage points or short out parts resulting in a risk of fire
or electrical shock.
Š Do not attempt to service the device yourself. Refer all servicing to
qualified service personnel.
Š If the following conditions occur, unplug the device from the wall outlet
and bring it to qualified service personnel for repair.
Š The power cord or plug has become damaged or frayed.
Š Liquid has been spilled into the device.
Š The device has been exposed to rain or water.
Š The device has been dropped, or the cabinet has been damaged.
Š The device exhibits a distinct change in performance, indicating a need
for service.
Š The device does not operate normally when the operating instructions
are followed.
Š Only adjust those controls that are covered in the operating instructions.
Improper adjustment of other controls may result in damage that will
require extensive work by a qualified technician to repair.
Š Do not connect the RJ-11 connector marked “Sensor” to a public
telecommunication network.