ATEN NRGence HV Series, Руководство пользователя

Страница: 30 / 73

UPS User Manual
20
Installation
Refer to the diagram following the steps below to connect the UPS:
Note: OL1000HV is the example used here.
1. Connect the unit’s grounding terminal to a suitable grounded object.
2. Connect electrical appliances to the non-critical power outlets.
3. Connect electrical appliances (that you do not wish to have power
cut off) to the critical power outlets.
4. (Optional) Connect external battery to the External Battery
Connection Port. Refer to External Battery Connection on page 22.
5. (Optional) Connect a modem/phone/fax source (using a
corresponding cable) into the surge-protected “IN” outlet. Connect
an equipment (you wish to have surge protection for) to the “OUT”
outlet using another modem/fax/phone cable.
6. (Optional) Connect the USB Type B end of the included USB Type
A to B cable to the unit and the Type A end to a USB port on your
PC.
7. (Optional) Connect the included RS-232 cable between the RS-232
port of the unit and a communication port of your PC.
8. (Optional) Connect either SNMP or AS400 card for advanced
communication and monitoring options.
9. For HV models, connect the included power cable between this port
and an AC power socket.
For LV models, connect this power cable to an AC power socket.