ATEN CS1922M, Руководство пользователя

Страница: 7 / 17

CS1922M / CS1924M RS-232 Commands
7
Open / Close
The Open and Close commands allows you to start and end the link between
the computer sending RS-232 commands and the CS1922M / CS1924M. When
the link is open, the CS1922M / CS1924M only accepts RS-232 commands and
will not respond to front panel pushbuttons, mouse switching and hotkeys –
until the link is closed. The link starts with the
open command and ends with
the close command or after 2 minutes if no command is sent. The default value
is close.
Use the Formula - to set Parameters - to create a Command .
Formulas:
C [Enter]
Parameters:
Open/Close RS-232 Link Command
The available formulas for the Open/Close RS-232 Link commands are as
follows:
1. C [Enter]
For example, to open the RS-232 link between the computer and CS1922M /
CS1924M, type the following:
open [Enter]
2. C [Enter]
For example, to close the RS-232 link between the computer and CS1922M /
CS1924M, type the following:
close [Enter]
Command Description
open Open RS-232 Link Command
close Close RS-232 Link Command
Enter Description
Enter Enter and send out command