ATEN CS1922M, Руководство пользователя

Страница: 17 / 17

CS1922M / CS1924M RS-232 Commands
17
Display Mode
The Display Mode command allows you to set the switch to use SST Mode or
MST Mode to configure the monitor setup.
Use the Formula - to set Parameters - to create a Command .
Formula:
C C [Enter]
Parameters:
Display Mode Commands
Some available formulas for Change Display Mode commands are as follows:
1. C C [Enter]
For example, to set the switch to use SST mode, type the following:
display sst [Enter]
2. C C [Enter]
For example, to set the switch to use MST mode, type the following:
display mst [Enter]
Command Description
display Display Mode Command
Control Description
sst Set the Switch to use Single Stream
Transport (SST) mode
mst Set the Switch to use Multi-Stream
Transport (MST) mode
Enter Description
Enter Enter and send out command