ATEN CS1912, Руководство пользователя

Страница: 15 / 50

Chapter 1. Introduction
7
No. Component Description
1 Port Selection
Pushbuttons For manual port selection (see Manual Switching , page 13):
Š
Press a port selection pushbutton for longer than two seconds to
bring the KVM, USB hub, and audio focus to the computer
attached to its corresponding port.
Š
Press a port selection pushbutton twice to bring the audio focus to
the computer attached to its corresponding port.
Š
Press a switch for less than two seconds to bring only the KVM
focus to the computer attached to its corresponding port.
Š
Press switches 1 and 2 simultaneously for 2 seconds to start Auto
Scan Mode (see
Auto Scanning , page 21).
2 Port LEDs The Port LEDs are built into the Port Selection Pushbuttons. The
upper are KVM Port LEDs; the lower are USB LEDs:
KVM
Š
Lights DIM ORANGE to indicate that the computer attached to the
corresponding port is connected (online).
Š
Changes to BRIGHT ORANGE to indicate that the computer
attached to its corresponding port is the one that has the KVM
focus (Selected).
Š
Flashes to indicate that the computer attached to its corresponding
port is being accessed under Auto Scan mode.
USB
Š
Lights GREEN to indicate that the computer attached to its corre-
sponding port is the one that has access to the USB peripherals.
3 Audio Ports The cables from your main speakers plug in here. The speakers
plugged in here have priority over those on the rear panel.
4 USB 3.1 Gen
1 Hub USB peripherals (printers, scanners, drives etc.) plug into this port.
USB 3.1 Gen 1 port features 5 Gbps transfer rates.