ATEN CS17916, Руководство пользователя

Страница: 50 / 86

CS1798 / CS17916 User Manual
40
(Continued from previous page.)
(Continues on next page.)
Setting Function
SET LOGOUT
TIMEOUT If there is no input from the console for the amount of time set with
this function, the user is automatically logged out. A login is
necessary before the console can be used again.
This enables other users to gain access to the computers when the
original user is no longer accessing them, but has forgotten to log
out. To set the timeout value, key in a number from 1–180 minutes,
then press
[Enter] . The default setting of 0 disables this function.
Note: This feature does not function if Set Login Mode is disabled.
See SET LOGIN MODE , page 42.
EDIT PORT
NAMES To help remember which computer is attached to a particular port,
every port can be given a name. This function allows the
administrator to create, modify, or delete port names.
To edit a port name:
1. Click the port, or use the navigation keys to move the highlight
bar to it, then press [Enter] .
2. Key in the new port name, or modify/delete the old one. The
maximum number of characters allowed for the port name is 12.
Legal characters include:
Š
All alpha characters: A – Z
Š
All numeric characters: 0 – 9
Š
* ( ) + : - , ? . /
Case does not matter; the OSD displays the port name in all
capitals no matter how they were keyed in.
3. When you have finished editing, press [Enter] to have the
change take effect. To abort the change, press [Esc] .
RESTORE
DEFAULT
VALUES This function is used to undo all changes and return the setup to
the original factory default settings (See
Factory Default Hotkeys
and Settings , page 74) except for the port name list, username and
password information, which are saved.
CLEAR THE
NAME LIST This function clears the port name list.
ACTIVATE
BEEPER Choices are Y (on), or N (off). When activated, the beeper sounds
whenever a port is changed; when activating the Auto Scan
function (see
F7 SCAN , page 44); or an invalid entry is made on an
OSD menu. The default is Y .