Chapter 3
Operation
Picture Adjustment
Use the EQ switch to adjust the equalization strength and improve an image.
There is an EQ switch that corresponds to each display connected to the
CE604R (front panel).
The values range from 0-7 where:
7: strongest equalization
0: weakest equalization
LED Display
The CE604 Local and Remote Units have front panel LEDs to indicate their
operating status, as shown in the tables, following:
CE604L (Local Units)
LED
Indication
Link
(Green)
Lights steadily to indicate that the connection to the Remote
unit is ok.
Flashes every 0.25 seconds to indicate that there is a prob-
lem on the Cat5 Main connection.
Flashes every 0.5 seconds to indicate that there is a problem
on the Cat5 Sub connection.
Flashes together with the Power LED to indicate that firmware
upgrade is in progress.
Power (Green)
Lights steadily to indicate that the Local unit is receiving
power.
Flashes together with the Link LED to indicate that firmware
upgrade is in progress.