CE604 User Manual
12
Setting Up
Setting up the CE604 DVI KVM Extender system is simply a matter of
plugging in the cables. Make sure that all the equipment to be connected up is
powered Off. Refer to the installation diagram on the following page and do the
following:
1. Plug the connectors on the USB DVI KVM cable set / DVI cable supplied
with this unit into the appropriate ports on the front of the Local Unit
(CE604L).
2. Plug the connectors on the other end of the DVI KVM cable / DVI cable
into the appropriate ports on the local computer.
Note:
If you are combining the CE604 with a KVM switch, the other end
of the DVI KVM cable plugs into the appropriate ports on the KVM
switch.
3. Plug a compatible monitor/display into the CE604R front panel DVI port.
Do the same or a second monitor/display.
4. (Optional) For control of serial devices, connect the RS-232 serial port on
the remote unit to a serial device or the serial port of a local computer.
5. Plug either end of the Cat 5e cable into the CE604L's Sub / Main ports.
Plug the other end of the Cat 5e cable into the Sub / Main ports of the
Remote Unit (CE604R).
6. Plug one of the power adapters (supplied with this package) into a DC
source; plug the adapter's power cable into the CE604L's Power Jack.
7. Plug the cables from the remote console devices (mouse, keyboard,
monitor, speakers, microphone), into their ports on the Console side of the
CE604R.
8. Plug the second power adapter (supplied with this package) into a DC
source; plug the adapter's power cable into the CE604R's Power Jack.